or 4 payments of 
Description
Jabsco Hotshot 6.0 HD Deckwash Pump 12 Volt P601J-219N-3A J20-252 70 PSI 22.7LPM 6GPM
Our top-of-the-range deckwash pump. The NEW Heavy Duty (HD) HotShot 6.0 washdown pumps offer robust construction and high performance with super high flow of 22.7 litres per minute and ulta high pressure of 70PSI.
These new modern design pumps have a 5-chamber diaphragm heavy-duty wider diameter motor with a powder-coated shell, cast aluminium end bells and lower housing – to improve pressure capability and offer longer life and exceptional performance.
The Jabsco Hotshot 6.0 HD automatic deck washdown kit supplies a very high & constant saltwater flow with quiet operation.
Ultra High pressure 70 PSI jet is ideal for removing mud from anchoring hardware and blasting decks and fishing platforms clean with ease. Ideal for larger fishing boats & cruisers.
These pumps are also available as a pump & hose kit including 7.6 metre (25 foot) of heavy duty black coiled hose including brass end fittings.
This pump replaces the Jabsco Hotshot 6.0 Deckwash Pump 12 Volt 82605-0092 J20-152 70 PSI
The HD series Hotshot 6.0 pump features include –
- Up to 22.7 litre (6.0 GPM) per minute flow rate
- 70 PSI (4.8 bar) ultra high pressure cut out for blasting anchors & fishing areas clean
- The motor is ignition-protected & thermal overload protected
- Self-priming to 2.1 metres (7 ft)
- Diaphragm design can run dry for extended periods
- Spray-resistant motor coating IPX6 – NOT waterproof
- Sealed pressure switch extends pump life
- Includes pump, plug-in inlet filter, large deluxe hose trigger nozzle, standard Australian garden hose connector, USA GHT connector to suit HoseCoil hoses, 2 x 20mm Large Dia. straight hose barb ports & 1 x snap-in USA GHT port.
- Automatic operation at the squeeze of the trigger gun nozzle provided
- High capacity up to 22.7 litres per minute flow
- Suitable for use with salt water
- Sealed pressure switch and injection moulded diaphragm
- 3-year limited warranty
- Improved larger noise-dampening rubber feet on the pump base
- Larger and more efficient motor brushes for extended life
Also available as a kit including 7.6 metre coiled hose (see separate listing)
Kit includes:
- 1 x HotShot HD6 Washdown Pump
- 2 x 3/4″ (19mm) straight hose barbs
- 1 x 3/4″ GHT fittings
- 1 x 90° 40 mesh quick connect strainer
- 1 x Deluxe trigger nozzle & quick connect hose adapters
12 volt Maximum Current Draw 19 amp Recommended Fuse Size 25A
Product Data Sheet Hotshot HD6_12V datasheet
| Motor Design | Brushed, permanent magnet TENV |
|---|---|
| Pumphead upper housing material | Fiber reinforced polypropylene |
| Diaphragm | Co-molded TPV |
| Check Valves | EPDM |
| Max Inlet Pressure | 30 PSI (2.1 Bar) |
| Fluid Temp Range | 32°F – 140°F (0°C – 60°C) |
| Dry Self-priming Capability | 7ft min (2.1m min) |
| Certifications | CE, ISO8846, RCM |
| Ingress protection | IPX6 |
| Warranty | 3 years |
Overall length 10.2in (259mm)
Overall width 5.1 in (129mm)
Overall Height 4.7in (119mm)
Motor Height 4.0in (102mm)
Mounting Length CTR to CTR 2.0in (51mm)
Mounting Width CTR to CTR 3.6in (91mm)
(CTR – centre of mounting hole)
