or 4 payments of 
Description
Marine Fuel Filter Water Separator Boat Mercury 35-60494-1 & 35-809101 Racor S3213 & S3220 with Clear Bowl & 10 Micron Filter
This is the new black version of the popular filter. The photo of the white filter is for reference purposes – this is the original design and packaging. The 2 filters are same expcept for colour.
Marine Water Separator Fuel Filter Boat Mercury 35-60494-1 & 35-809101 Racor S3213 & S3220 with Clear Bowl 10 Micron
This kit is designed to update or replace your fuel filter with clear water separating bowl. This is very popular kit as the filter and clear bowl are both available as spare parts – removing the need to replace the whole assembly at every service or is a part is lost.
37318 – Complete fuel filter kit includes head with mounting bracket, 2 brass tails 3/8″ BSP x 10mm, 2 x 3/8″ BSP brass blanking plugs, element, clear bowl and drain plug & hose clamps 10 micron filter media, Suitable for fuel petrol and 2 stroke, not suitable for diesel.
- Viton O-ring seal included.
- 37318 – Complete fuel filter kit includes head with mounting bracket, 2 brass tails 3/8″ BSP x 10mm, 2 x 3/8″ BSP brass blanking plugs, element, clear bowl and drain plug & hose clamps.
- PART NO. 37318
- Pack Qty: 1
- Thread Type / Size: 11/16″ 16 TPI
- Interchangeable With: Racor® S3213, S3220 / Mercury® 35-809101 / Mercury® 35-60494-1
- Note: Interchangeable with: RACOR S3213, S3220 MERC 35-809101
- Universal Fuel Filter Water Separator System
- Top Of The Range German Quality Unit
- What makes it so good you ask? The o-ring does not compress and allow the filter to touch the housing, which then creates a leak. The O-rings are excellent quality.
- VITON SEALS are great quality- best on the market
- 10 MICRON GERMAN FILTER MEDIA
- Thread Type / Size: Mercury Thread 11/16″ 16 T.P.I
- Included: Nylon anti -corrosive head with brass fittings
Other parts available:
INSTRUCTIONS:
Draining of water or replacement of element is determined by contamination level of fuel. Inspect the collection bowl for water daily and service as necessary. Replace element at least once a year or when a decrease of power is noticed. To Drain Water 1. Loosen self-venting drain plug to drain water from bowl into a container. 2. Tighten drain. 3. Use primer bulb to fill filter with fuel. 4. Start engine and check ensure there are no leaks.
To Replace Element
1. Loosen self-venting drain plug and drain the element into a container. 2. Remove filter element from mounting bracket with bowl connected. 3. Remove bowl from filter element and clean o-ring gland on bowl. BOWL IS REUSABLE * DO NOT DISCARD. 4. Lubricate o-ring with oil or grease and install on bowl. 5. Install bowl onto new element, tighten by hand. 6. Lubricate filter top seal with oil or grease. 7. Fill filter/bowl assemble with clean fuel and attach onto mounting bracket, tighten by hand. 8. Start engine and check to ensure there are no leaks.
