or 4 payments of 
Description
Rule IL200 “Niagara” Submersible / Inline Water Pump 12 Volt 200 GPH
This range of “Rule” (formerly LVM) centrifugal, dual fully submersible & in-line pumps have many applications in the boating, caravan, industrial, agricultural and general fields. They offer the following features and a wide variety of uses:
Applications
- Boating: In-line freshwater pump – snap off strainer for hose connection
- Emergency bilge pump – long leads and slimline design
- Saltwater deck wash/shower pump – simply lower overboard
- General: Portable pump with long electrical leads for many applications
- Caravan/camping – freshwater delivery from tank or stream
These RULE (formerly LVM) pumps are not self-priming. They must be gravity fed or a one-way valve used in line (if used as in-line hose to hose) or fully submersed (if used with the strainer). They all have a clip-on, clip-off strainer which, when removed, reveals a hose connection end for in-line pumping applications. Their super slim size allows them to fit into very small spaces and they easily fit into the filling hole of a 20-litre drum.
There are 3 pump sizes in the range offering various flow rates and features.
Specifications
- Suitable for water only.
- Intermittently rated motor (20 minutes on / 20 minutes off).
- Water transfer only – fresh or seawater.
- 12 litres per minute capacity – 14 PSI – 7.6 metre head.
- 200 GPH / 760 LPH.
- Dual use – submersible or 10mm (3/8″) or 13mm (1/2″) hose inline pump.
- Includes 1 metre of wiring cable – bare wires for connection.
- Extra slim body size: 130 x 36 mm.
- 12 volt, 2.8 amp.
- Head: 25 feet / 7.6 metres.
- Operating temperature: 60°C.
- Length 130mm
- Diameter 36mm
- Weight 113 grams
- 3 year warranty.
Performance Curve
- 200 GPH @ 0 ft. of head.
- 175 GPH @ 3.35 ft. of head.
- 160 GPH @ 5 ft. of head.
- 125 GPH @ 6.7 ft. of head.
- 115 GPH @ 10 ft. of head.
- 80 GPH @ 15 ft. of head.
- 30 GPH @ 20 ft. of head.
Wiring
Blue wire is the Black Wire – Negative
Brown wire is the Red Wire – Positive
Warning: This pump is not self-priming. Ensure proper gravity feed or submersion to avoid damage.
Boat Hut Insight
While the IL200’s slim profile is great for tight spots, remember that its intermittent rating means it’s not designed for continuous operation. If you’re planning long pumping sessions, consider pairing it with a timer or switch to protect the motor or consider the IL280 which is rated for continuous duty RWB65. Also, the dual-use design means you get a lot of flexibility, but don’t forget to check hose sizes carefully before installation — a mismatch can cause frustrating leaks or reduced flow.
Reviews
There are no reviews yet.